| Age | Commit message (Collapse) | Author |
|---|
|
Closes #25518
|
|
Mainly I removed `Temporal.Calendar` and `Temporal.TimeZone` and
replaced them to APIs that handle calendar and timezone as strings.
https://github.com/tc39/proposal-temporal/pull/2925
Related #24836
|
|
Closes #7394
---------
Co-authored-by: snek <snek@deno.com>
|
|
This commit removes all occurrences of `--unstable` flag
from all the tests that are run in CI.
Turns out none of the tests actually required that flag
anymore.
|
|
This commit effectively removes the --unstable flag.
It's still being parsed, but it only prints a warning that a granular
flag should be used instead and doesn't actually enable any
unstable feature.
Closes https://github.com/denoland/deno/issues/25485
Closes https://github.com/denoland/deno/issues/23237
|
|
This was accidentally enabled in byonm, but it requires the
`--unstable-bare-node-builtins` flag.
Closes #25358
|
|
This commit improves error messages for unstable APIs:
- `--unstable-broadcast-channel`
- `--unstable-cron`
- `--unstable-http`
- `--unstable-kv`
- `--unstable-temporal`
By providing information and hints what went wrong and how the
error can be fixed. It reuses the same infra that was added in
https://github.com/denoland/deno/pull/21764.
|
|
This commit adds support for executing top-level `.cjs` files,
as well as import `.cjs` files from within npm packages.
This works only for `.cjs` files, the contents of sibling `package.json`
are not consulted for the `"type"` field.
Closes https://github.com/denoland/deno/issues/25384
---------
Signed-off-by: David Sherret <dsherret@users.noreply.github.com>
Co-authored-by: Luca Casonato <hello@lcas.dev>
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
|
|
Deno has been using a deny list, which doesn't make sense because a lot
of these options don't even work.
Closes #25363
|
|
`--allow-run` even with an allow list has essentially been
`--allow-all`... this locks it down more.
1. Resolves allow list for `--allow-run=` on startup to an absolute
path, then uses these paths when evaluating if a command can execute.
Also, adds these paths to `--deny-write`
1. Resolves the environment (cwd and env vars) before evaluating
permissions and before executing a command. Then uses this environment
to evaluate the permissions and then evaluate the command.
|
|
Remove `--allow-hrtime` and `--deny-hrtime`. We are doing this because
it is already possible to get access to high resolution timers through
workers and SharedArrayBuffer.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
|
|
Instead of `RUST_LOG` env var, we now support `DENO_LOG` env var.
This is done to be able to set a setting specific to `deno` that
wouldn't impact
other binaries written in Rust.
Ref
https://github.com/denoland/deno/issues/10558#issuecomment-2324300211
|
|
Towards https://github.com/denoland/deno/issues/25241
Removes code for tests of unstable APIs that were stabilized with Deno
2.0.0-rc.0.
|
|
|
|
This commit effectively turns Deno into Deno 2.0.
This is done by forcing `DENO_FUTURE=1` env var, that was available in
the past few months to try Deno 2 changes.
This commit contains several breaking changes scheduled for Deno 2:
- all deprecated JavaScript APIs are not available any more, mostly
`Deno.*` APIs
- `window` global is removed
- FFI, WebGPU and FS APIs are now stable and don't require
`--unstable-*` flags
- import assertions are no longer supported
- "bring your own node modules" is enabled by default
This is the first commit in a series that are scheduled before the Deno
2 release.
Follow up work is tracked in
https://github.com/denoland/deno/issues/25241.
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
Co-authored-by: Nathan Whitaker <nathan@deno.com>
|
|
full --allow-run permissions (#25271)
Follow up to https://github.com/denoland/deno/pull/25221
I looked into what the list was and it was quite extensive, so I think
as suggested in
https://github.com/denoland/deno/issues/11964#issuecomment-2314585135 we
should disallow this for any `LD_` prefixed env var.
|
|
more terse (#25247)
Stores normalized version constraints in the lockfile, which will
improve reproducibility and will fix a bug with duplicate specifiers
ending up in the lockfile. Also, gets rid of some duplicate data in the
specifiers area of the lockfile.
|
|
This changes the global cache to store the cache file for remote modules
in one file instead of two.
|
|
This won't be fully stabilized until 2.0 is released.
|
|
|
|
This commit updates permission prompt to add a link
to the documentation for particular flag.
Additionally the box drawings around the prompt have been slightly
altered for better visibility.
<img width="737" alt="Screenshot 2024-08-08 at 12 42 32"
src="https://github.com/user-attachments/assets/6ae748cd-4f29-439d-b0ee-f28f565f211a">
|
|
|
|
|
|
Adds a new `no-sloppy-imports` lint rule and cleans up the lint code.
Closes #22844
Closes https://github.com/denoland/deno_lint/issues/1293
|
|
This change aims to replace all relative import specifiers targeted at
`tests/util/std` with mapped ones (using a `deno.json` file). Towards
updating the `std` git submodule.
|
|
(#24593)
Originally landed in
https://github.com/denoland/deno/commit/f6fd6619e708a515831f707438368d81b0c9aa56.
Reverted in https://github.com/denoland/deno/pull/24574.
This reland contains a fix that sends "Accept: */*" header for calls made
from "FileFetcher". Absence of this header made downloading source code
from JSR broken. This is tested by ensuring this header is present in the
test server that servers JSR packages.
---------
Co-authored-by: Sean McArthur <sean@seanmonstar.com>
|
|
(#24237)" (#24574)
This reverts commit f6fd6619e708a515831f707438368d81b0c9aa56.
I'm seeing a difference between canary and 1.45.2. In
`deno-docs/reference_gen` I can't download dax when running `deno task
types`
```
~/src/deno-docs/reference_gen# deno upgrade --canary
Looking up latest canary version
Found latest version f6fd6619e708a515831f707438368d81b0c9aa56
Downloading https://dl.deno.land/canary/f6fd6619e708a515831f707438368d81b0c9aa56/deno-aarch64-apple-darwin.zip
Deno is upgrading to version f6fd6619e708a515831f707438368d81b0c9aa56
Archive: /var/folders/9v/kys6gqns6kl8nksyn4l1f9v40000gn/T/.tmpb5lDnq/deno.zip
inflating: deno
Upgraded successfully
~/src/deno-docs/reference_gen# deno -v
deno 1.45.2+f6fd661
~/src/deno-docs/reference_gen# rm -rf /Users/ry/Library/Caches/deno
~/src/deno-docs/reference_gen# deno task types
Task types deno task types:deno && deno task types:node
Task types:deno deno run --allow-read --allow-write --allow-run --allow-env --allow-sys deno-docs.ts
error: JSR package manifest for '@david/dax' failed to load. expected value at line 1 column 1
at file:///Users/ry/src/deno-docs/reference_gen/deno-docs.ts:2:15
~/src/deno-docs/reference_gen# deno upgrade --version 1.45.2
Downloading https://github.com/denoland/deno/releases/download/v1.45.2/deno-aarch64-apple-darwin.zip
Deno is upgrading to version 1.45.2
Archive: /var/folders/9v/kys6gqns6kl8nksyn4l1f9v40000gn/T/.tmp3R7uhF/deno.zip
inflating: deno
Upgraded successfully
~/src/deno-docs/reference_gen# rm -rf /Users/ry/Library/Caches/deno
~/src/deno-docs/reference_gen# deno task types
Task types deno task types:deno && deno task types:node
Task types:deno deno run --allow-read --allow-write --allow-run --allow-env --allow-sys deno-docs.ts
Task types:node deno run --allow-read --allow-write=. --allow-env --allow-sys node-docs.ts
```
|
|
This commit re-implements `ext/fetch` and all dependent crates
using `hyper` and `hyper-util`, instead of `reqwest`.
The reasoning is that we want to have greater control and access
to low level `hyper` APIs when implementing `fetch` API as well
as `node:http` module.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Adds much better support for the unstable Deno workspaces as well as
support for npm workspaces. npm workspaces is still lacking in that we
only install packages into the root node_modules folder. We'll make it
smarter over time in order for it to figure out when to add node_modules
folders within packages.
This includes a breaking change in config file resolution where we stop
searching for config files on the first found package.json unless it's
in a workspace. For the previous behaviour, the root deno.json needs to
be updated to be a workspace by adding `"workspace":
["./path-to-pkg-json-folder-goes-here"]`. See details in
https://github.com/denoland/deno_config/pull/66
Closes #24340
Closes #24159
Closes #24161
Closes #22020
Closes #18546
Closes #16106
Closes #24160
|
|
Reland of https://github.com/denoland/deno/pull/24056 that doesn't
suffer from the problem that was discovered in
https://github.com/denoland/deno/pull/24261.
It uses upgraded `hyper` and `hyper-util` that fixed the previous
problem in https://github.com/hyperium/hyper/pull/3691.
|
|
This reverts commit fb31eaa9ca59f6daaee0210d5cd206185c7041b9.
Reverting because users reported spurious errors when downloading
dependencies - https://github.com/denoland/deno/issues/24260.
Closes https://github.com/denoland/deno/issues/24260
|
|
|
|
This commit updates Deno to use `reqwest` at 0.12.4
and `rustls` at 0.22. Other related crates were updated
as well to match versions accepted by `reqwest` and `rustls`.
Note: we are not using the latest available `rustls` yet,
but this upgrade was non-trivial already, so a bump to
0.23 for `rustls` will be done in a separate commit.
Closes #23370
---------
Signed-off-by: Ryan Dahl <ry@tinyclouds.org>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
|
|
To avoid duplicate winreg crate in #24056
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
In https://github.com/denoland/deno/pull/23955 we changed the sqlite db
journal mode to WAL. This causes issues when someone is running an old
version of Deno using TRUNCATE and a new version because the two fight
against each other.
|
|
This patch fixes stdin read hanging on user input when switching tty
mode on Windows
Fixes #21111
On Windows, when switching from line to raw mode:
- Cancel ongoing console read by writing a return keypress to its input
buffer. This blocks the main thread until any ongoing read has been
cancelled to prevent interference with the screen state.
- On the read thread, restore the cursor position to where it was before
writing the enter, undoing its effect on the screen state.
- Restart reading and notify the main thread.
|
|
checksum errors (#23979)
Includes:
* https://github.com/denoland/deno_graph/pull/486
* https://github.com/denoland/deno_graph/pull/488
* https://github.com/denoland/deno_lockfile/pull/25
* https://github.com/denoland/deno_lockfile/pull/22
* https://github.com/denoland/deno_graph/pull/483
* https://github.com/denoland/deno_graph/pull/470
|
|
https://github.com/denoland/deno/actions/runs/9084225162/job/24964698935
```
---- run::file_fetcher_preserves_permissions stdout ----
command /Users/runner/work/deno/deno/target/debug/deno repl --quiet
command cwd /Users/runner/work/deno/deno/tests/testdata
------ Start Full Text ------
"const a = await import('http://localhost:4545/run/019_media_types.ts');\r\n"
------- End Full Text -------
Next text: "\r\n"
thread 'run::file_fetcher_preserves_permissions' panicked at tests/integration/run_tests.rs:4615:15:
Timed out.
```
Closes https://github.com/denoland/deno/issues/23690
Closes https://github.com/denoland/deno/issues/23682
Closes https://github.com/denoland/deno/issues/23625
|
|
Part of https://github.com/denoland/deno/issues/23624
|
|
(#23686)
Precursor to #23236
This implements the SNI features, but uses private symbols to avoid
exposing the functionality at this time. Note that to properly test this
feature, we need to add a way for `connectTls` to specify a hostname.
This is something that should be pushed into that API at a later time as
well.
```ts
Deno.test(
{ permissions: { net: true, read: true } },
async function listenResolver() {
let sniRequests = [];
const listener = Deno.listenTls({
hostname: "localhost",
port: 0,
[resolverSymbol]: (sni: string) => {
sniRequests.push(sni);
return {
cert,
key,
};
},
});
{
const conn = await Deno.connectTls({
hostname: "localhost",
[serverNameSymbol]: "server-1",
port: listener.addr.port,
});
const [_handshake, serverConn] = await Promise.all([
conn.handshake(),
listener.accept(),
]);
conn.close();
serverConn.close();
}
{
const conn = await Deno.connectTls({
hostname: "localhost",
[serverNameSymbol]: "server-2",
port: listener.addr.port,
});
const [_handshake, serverConn] = await Promise.all([
conn.handshake(),
listener.accept(),
]);
conn.close();
serverConn.close();
}
assertEquals(sniRequests, ["server-1", "server-2"]);
listener.close();
},
);
```
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
|
|
Moves the test npm registry server port from `4558` to `426x`
|
|
`tests/registry` folder (#23717)
1. Moves the npm registries to their own dedicated ports.
2. Moves the data files out of `tests/testdata/npm/registry` to
`tests/registry/npm`.
|
|
|
|
Ref #17944, https://github.com/swc-project/swc/issues/8893
TypeScript removes the `assert` keywords in the transpile, so this PR
only works for JavaScript files
|
|
Also did some renames from underscores to hyphens
|
|
|
|
This PR adds private `[REF]()` and `[UNREF]()` methods to Stdin class,
and call them from Node.js polyfill layer (`TTY` class). This enables
`process.stdin.unref()` and `process.stdin.ref()` for the case when
stdin is terminal.
closes #21796
|
|
This commit changes the workspace support to provide all workspace
members to be available as imports based on their names and versions.
Closes https://github.com/denoland/deno/issues/23343
|
|
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This PR wires up a new `jsxPrecompileSkipElements` option in
`compilerOptions` that can be used to exempt a list of elements from
being precompiled with the `precompile` JSX transform.
|
