| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
This makes the permission system more versatile.
|
|
Continuation of work in #25488.
---------
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
|
|
Closes #7394
---------
Co-authored-by: snek <snek@deno.com>
|
|
Towards #22079
---------
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
|
|
|
|
Towards #22079
---------
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
|
|
Towards #22079
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
|
|
Towards #22079
|
|
|
|
This is in preparation for extracting out node resolution code from
ext/node (which is something I'm going to do gradually over time).
Uses https://github.com/denoland/deno_package_json
|
|
|
|
Also removes permissions being passed in for node resolution. It was
completely useless because we only checked it for reading package.json
files, but Deno reading package.json files for resolution is perfectly
fine.
My guess is this is also a perf improvement because Deno is doing less
work.
|
|
`Deno.FsFile.lock[Sync]()` (#23754)
Related #22230
CC @dyedgreen
|
|
`Deno.FsFile.sync[Sync]()` (#23733)
Closes #22230
|
|
open (#23208)
Embedders may have special requirements around file opening, so we add a
new `check_open` permission check that is called as part of the file
open process.
|
|
1. Stops `deno publish` using some custom include/exclude behaviour from
other sub commands
2. Takes ancestor directories into account when resolving gitignore
3. Backards compatible change that adds ability to unexclude an exclude
by using a negated glob at a more specific level for all sub commands
(see https://github.com/denoland/deno_config/pull/44).
|
|
Renames `op_fs_fstat_{sync/async}` to `op_fs_file_stat_{async/sync}` in
preparation of the upcoming removal of `Deno.fstat()` in v2.
|
|
- `Deno.FsFile.dataSync` -> `Deno.FsFile.syncData`
- `Deno.FsFile.dataSyncSync` -> `Deno.FsFile.syncDataSync`
Also marks these APIs as unstable
|
|
|
|
Towards https://github.com/denoland/deno/issues/20779.
|
|
|
|
This commit adds new "--deny-*" permission flags. These are complimentary to
"--allow-*" flags.
These flags can be used to restrict access to certain resources, even if they
were granted using "--allow-*" flags or the "--allow-all" ("-A") flag.
Eg. specifying "--allow-read --deny-read" will result in a permission error,
while "--allow-read --deny-read=/etc" will allow read access to all FS but the
"/etc" directory.
Runtime permissions APIs ("Deno.permissions") were adjusted as well, mainly
by adding, a new "PermissionStatus.partial" field. This field denotes that
while permission might be granted to requested resource, it's only partial (ie.
a "--deny-*" flag was specified that excludes some of the requested resources).
Eg. specifying "--allow-read=foo/ --deny-read=foo/bar" and then querying for
permissions like "Deno.permissions.query({ name: "read", path: "foo/" })"
will return "PermissionStatus { state: "granted", onchange: null, partial: true }",
denoting that some of the subpaths don't have read access.
Closes #18804.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
|
|
|
|
(#19611)
…nclusion" (#19519)"
This reverts commit 28a4f3d0f5383695b1d49ccdc8b0f799a715b2c2.
This change causes failures when used outside Deno repo:
```
============================================================
Deno has panicked. This is a bug in Deno. Please report this
at https://github.com/denoland/deno/issues/new.
If you can reliably reproduce this panic, include the
reproduction steps and re-run with the RUST_BACKTRACE=1 env
var set and include the backtrace in your report.
Platform: linux x86_64
Version: 1.34.3+b37b286
Args: ["/opt/hostedtoolcache/deno/0.0.0-b37b286f7fa68d5656f7c180f6127bdc38cf2cf5/x64/deno", "test", "--doc", "--unstable", "--allow-all", "--coverage=./cov"]
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: Failed to read "/home/runner/work/deno/deno/core/00_primordials.js"
Caused by:
No such file or directory (os error 2)', core/runtime/jsruntime.rs:699:8
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
|
|
Relands #19463. This time the `ExtensionFileSourceCode` enum is
preserved, so this effectively just splits feature
`include_js_for_snapshotting` into `exclude_js_sources` and
`runtime_js_sources`, adds a `force_include_js_sources` option on
`extension!()`, and unifies `ext::Init_ops_and_esm()` and
`ext::init_ops()` into `ext::init()`.
|
|
(#19490)
… (#19463)"
This reverts commit ceb03cfb037cf7024a5048b17b508ddda59cfa05.
This is being reverted because it causes 3.5Mb increase in the binary
size,
due to runtime JS code being included in the binary, even though it's
already snapshotted.
CC @nayeemrmn
|
|
Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
|
|
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This allows for having a conditional `Send + Sync` on the file system trait for Deploy.
|
|
1. Boxed `File` and `FileSystem` to allow more easily passing this
through the CLI code (as shown within this pr).
2. `StdFileResource` is now `FileResource`. `FileResource` now contains
an `Rc<dyn File>`.
|
|
This commit removes the dependencies on `deno_core` for the Fs trait.
This allows to move the trait into a different crate that does not
depend on core in the limit.
This adds a new `bounds` field to `deno_core::extension!` that expands
to `where` clauses on the generated code. This allows to add bounds to
the extension parameters, such as `Fs::File: Resource`.
|
|
This commit abstracts out the specifics of the underlying system calls
FS operations behind a new `FileSystem` and `File` trait in the
`ext/fs` extension.
This allows other embedders to re-use ext/fs, but substituting in a
different FS backend.
This is likely not the final form of these traits. Eventually they will
be entirely `deno_core::Resource` agnostic, and will live in a seperate
crate.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
(#18404)
#17526
|
|
This upgrades TypeScript to 5.0.2, but does not have ES decorator
support because swc does not support that yet.
|
|
|
|
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
|
|
(#18210)
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This commit adds support for retrieving `dev` information
when stating files on Windows.
Additionally `Deno.FileInfo` interfaces was changed to always
return 0 for fields that we don't retrieve information for on Windows.
Closes https://github.com/denoland/deno/issues/18053
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
|
|
These methods are confusing because the arguments are backwards. I feel
like they should have never been added to `Option<T>` and that clippy
should suggest rewriting to
`map(...).unwrap_or(...)`/`map(...).unwrap_or_else(|| ...)`
https://github.com/rust-lang/rfcs/issues/1025
|
|
Closes #17781.
|
|
This commit removes "deno_core::RuntimeOptions::extensions_with_js".
Now it's embedders' responsibility to properly register extensions
that will not contains JavaScript sources when running from an existing
snapshot.
Prerequisite for https://github.com/denoland/deno/pull/18080
|
|
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
|
|
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
|
|
This commit factors out APIs related to file system from "runtime/"
to a separate "deno_fs" extension crate.
|
