| Age | Commit message (Collapse) | Author |
|---|
|
With https://github.com/denoland/deno/pull/18568 landed we no longer
need "ext/flash".
This commit removes "deno_flash" extension completely.
This should have some impact on the binary and snapshot size.
Closes https://github.com/denoland/deno/issues/17356
|
|
Closes #17709
|
|
Co-authored-by: David Sherret <dsherret@gmail.com>
|
|
This is the release commit being forwarded back to main for 1.32.2
|
|
Co-authored-by: Levente Kurusa <lkurusa@kernelstuff.org>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Bumped versions for 1.32.0
---------
Co-authored-by: mmastrac <mmastrac@users.noreply.github.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
|
|
`http` is very stable, it's safe to "unpin" it from `=0.28.0` version.
This helps embedders that depend on newer version of `http` crate.
|
|
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
|
|
(#18210)
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: kt3k <kt3k@users.noreply.github.com>
|
|
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
|
|
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
|
|
Prerequisite for https://github.com/denoland/deno/pull/18080
|
|
for snapshotted modules (#18041)
This commit renames "deno_core::InternalModuleLoader" to
"ExtModuleLoader" and changes the specifiers used by the
modules loaded from this loader to "ext:".
"internal:" scheme was really ambiguous and it's more characters than
"ext:", which should result in slightly smaller snapshot size.
Closes https://github.com/denoland/deno/issues/18020
|
|
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
|
|
Co-authored-by: David Sherret <dsherret@gmail.com>
|
|
Applies suggestion from #17912
|
|
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
|
|
Closes #17583
|
|
requests (#17740)
This was not caught in the previous test case, as the response body was
smaller than the size of `HEAD` response.
This made `nwritten < responseLen` check in `writeFixedResponse` to
fail, and not trigger `op_flash_respond_async` as a result.
When the response body is larger than the `HEAD` though, as in the
updated test case (`HEAD` i 120 bytes, where our response is 300 bytes),
it would think that we still have something to send, and effectively
panic, as `op_flash_respond` already removed the request from the pool.
This change, makes the `handleResponse` function always calculate the
number of bytes to transmit when `HEAD` request is encountered.
Effectively ignoring `Content-Length` of the body, but still setting it
correctly in the request header itself.
Fixes https://github.com/denoland/deno/issues/17737
|
|
|
|
This PR refactors all internal js files (except core) to be written as
ES modules.
`__bootstrap`has been mostly replaced with static imports in form in
`internal:[path to file from repo root]`.
To specify if files are ESM, an `esm` method has been added to
`Extension`, similar to the `js` method.
A new ModuleLoader called `InternalModuleLoader` has been added to
enable the loading of internal specifiers, which is used in all
situations except when a snapshot is only loaded, and not a new one is
created from it.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
|
|
This is the release commit being forwarded back to main for 1.30.2
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
|
|
This is the release commit being forwarded back to main for 1.30.1
|
|
Currently fast ops will always check for the alignment of a TypedArray
when getting a slice out of them. A match is then done to ensure that
some slice was received and if not a fallback will be requested.
For Uint8Arrays (and WasmMemory which is equivalent to a Uint8Array) the
alignment will always be okay. Rust probably optimises this away for the
most part (since the Uint8Array check is `x % 1 != 0`), but what it
cannot optimise away is the fast ops path's request for fallback options
parameter.
The extra parameter's cost is likely negligible but V8 will need to
check if a fallback was requested and prepare the fallback call just in
case it was. In the future the lack of a fallback may also enable V8 to
much better optimise the result handling.
For V8 created buffers, it seems like all buffers are actually always
guaranteed to be properly aligned: All buffers seem to always be created
8-byte aligned, and creating a 32 bit array or 64 bit array with a
non-aligned offset from an ArrayBuffer is not allowed. Unfortunately,
Deno FFI cannot give the same guarantees, and it is actually possible
for eg. 32 bit arrays to be created unaligned using it. These arrays
work fine (at least on Linux) so it seems like this is not illegal, it
just means that we cannot remove the alignment checking for 32 bit
arrays.
|
|
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Updated third_party dlint to v0.37.0 for GitHub Actions. This PR
includes following changes:
* fix(prefer-primordials): Stop using array pattern assignments
* fix(prefer-primordials): Stop using global intrinsics except for
`SharedArrayBuffer`
* feat(guard-for-in): Apply new guard-for-in rule
|
|
If the JS handler gets a POST, PUT, or PATCH request, but doesn't
`await` the body, deno would panic because it will try to read the body
even though the request has already been handled.
Not sure how/where to test this case, so I could use some help with
that.
|
|
Closes https://github.com/denoland/deno/issues/2699
Closes https://github.com/denoland/deno/issues/2347
Uses unstable rustfmt features. Since dprint invokes `rustfmt` we do not
need to switch the cargo toolchain to nightly. Do we care about
formatting stability of our codebase across Rust versions? (I don't)
|
|
Just a `s/chuncked/chunked/g`.
|
|
The leading cause of the problem was that `handleResponse` has
`tryRespondChunked` passed as an argument, which in turn is implemented
as a call to `core.ops.op_try_flash_respond_chuncked`, that throws in
the repro code.
`handleResponse` was not handled correctly, as it not returned any
value, and had no `catch` attached to it.
It also effectively was never correctly handled inside two other blocks
with `resp.then` and `PromisePrototypeCatch(PromisePrototypeThen(resp,
"..."))` as well, as it just short-circuited the promise with an empty
resolve, instead of relying on the last `(async () => {})` block.
This change makes `handleResponse` return a correct value and attach
`onError` handler to the "non-thenable" variant of response handling
code.
|
|
|
|
|
|
|
|
|
|
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Yearly tradition of creating extra noise in git.
|
|
Introduces `SafeSetIterator` and `SafeMapIterator` to primordials
|
|
Co-authored-by: dsherret <dsherret@users.noreply.github.com>
|
|
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Fixes https://github.com/denoland/deno/issues/16934
Example compiler error:
```
error: mutable opstate is not supported in async ops
--> core/ops_builtin.rs:122:1
|
122 | #[op]
| ^^^^^
|
= note: this error originates in the attribute macro `op` (in Nightly builds, run with -Z macro-backtrace for more info)
```
|
|
Co-authored-by: kt3k <kt3k@users.noreply.github.com>
|
|
(#16839)
…ed promises in mind (#16616)"
This reverts commit fd023cf7937e67dfde5482d34ebc60839eb7397c.
There are reports saying that Vite is often hanging in 1.28.2 and this
is
the only PR that changed something with HTTP server. I think we should
hold off on trying to fix this and instead focus on #16787
CC @magurotuna
|
