| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
workspace (#24611)
This makes bare specifiers for npm packages work when inside a
workspace, which emulates the same behaviour as when there's a
node_modules directory. The bare specifier can be overwritten by
specifying an import map entry or package.json dependency entry.
* https://github.com/denoland/deno_config/pull/88
Closes #24605
|
|
Adds much better support for the unstable Deno workspaces as well as
support for npm workspaces. npm workspaces is still lacking in that we
only install packages into the root node_modules folder. We'll make it
smarter over time in order for it to figure out when to add node_modules
folders within packages.
This includes a breaking change in config file resolution where we stop
searching for config files on the first found package.json unless it's
in a workspace. For the previous behaviour, the root deno.json needs to
be updated to be a workspace by adding `"workspace":
["./path-to-pkg-json-folder-goes-here"]`. See details in
https://github.com/denoland/deno_config/pull/66
Closes #24340
Closes #24159
Closes #24161
Closes #22020
Closes #18546
Closes #16106
Closes #24160
|
|
checksum errors (#23979)
Includes:
* https://github.com/denoland/deno_graph/pull/486
* https://github.com/denoland/deno_graph/pull/488
* https://github.com/denoland/deno_lockfile/pull/25
* https://github.com/denoland/deno_lockfile/pull/22
* https://github.com/denoland/deno_graph/pull/483
* https://github.com/denoland/deno_graph/pull/470
|
|
|
|
|
|
Had to revert back swc due to
https://github.com/swc-project/swc/issues/8840
Fixes:
- https://github.com/denoland/deno_lint/pull/1262
- https://github.com/denoland/deno_doc/pull/538
- https://github.com/denoland/deno_doc/pull/537
- https://github.com/denoland/deno_graph/pull/430
- https://github.com/denoland/deno_graph/pull/425
- https://github.com/denoland/deno_graph/pull/432
|
|
update to Rust 1.77.2
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
|
|
We were missing saying that a file is CJS when some Deno code imported
from the node_modules directory at runtime.
|
|
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
|
|
Upgrades deno_graph to 0.64 where deno_graph is now responsible for
turning bytes into a string. This is in preparation for Wasm modules.
|
|
|
|
for a directory, and TS files from JS extensions (#21464)
Adds an `--unstable-sloppy-imports` flag which supports the
following for `file:` specifiers:
* Allows writing `./mod` in a specifier to do extension probing.
- ex. `import { Example } from "./example"` instead of `import { Example
} from "./example.ts"`
* Allows writing `./routes` to do directory extension probing for files
like `./routes/index.ts`
* Allows writing `./mod.js` for *mod.ts* files.
This functionality is **NOT RECOMMENDED** for general use with Deno:
1. It's not as optimal for perf:
https://marvinh.dev/blog/speeding-up-javascript-ecosystem-part-2/
1. It makes tooling in the ecosystem more complex in order to have to
understand this.
1. The "Deno way" is to be explicit about what you're doing. It's better
in the long run.
1. It doesn't work if published to the Deno registry because doing stuff
like extension probing with remote specifiers would be incredibly slow.
This is instead only recommended to help with migrating existing
projects to Deno. For example, it's very useful for getting CJS projects
written with import/export declaration working in Deno without modifying
module specifiers and for supporting TS ESM projects written with
`./mod.js` specifiers.
This feature will output warnings to guide the user towards correcting
their specifiers. Additionally, quick fixes are provided in the LSP to
update these specifiers:
|
|
As title. This will help use the two independently from the other, which
will help in an upcoming deno doc PR where I need to parse the source
files with scope analysis.
|
|
This PR adds a new unstable "bring your own node_modules" (BYONM)
functionality currently behind a `--unstable-byonm` flag (`"unstable":
["byonm"]` in a deno.json).
This enables users to run a separate install command (ex. `npm install`,
`pnpm install`) then run `deno run main.ts` and Deno will respect the
layout of the node_modules directory as setup by the separate install
command. It also works with npm/yarn/pnpm workspaces.
For this PR, the behaviour is opted into by specifying
`--unstable-byonm`/`"unstable": ["byonm"]`, but in the future we may
make this the default behaviour as outlined in
https://github.com/denoland/deno/issues/18967#issuecomment-1761248941
This is an extremely rough initial implementation. Errors are
terrible in this and the LSP requires frequent restarts. Improvements
will be done in follow up PRs.
|
|
closes #20566
|
|
Creates the `cli::npm::managed` module and starts moving more
functionality into it.
|
|
|
|
Some people might get think they need to import from this directory,
which could cause confusion and duplicate dependencies. Additionally,
the `vendor` directory has special behaviour in the language server, so
importing from the folder will definitely cause confusion and issues
there.
|
|
(#19837)
Closes #19833
|
|
Closes #16108
|
|
Closes #18583
|
|
This is the initial support for npm and node specifiers in `deno
compile`. The npm packages are included in the binary and read from it via
a virtual file system. This also supports the `--node-modules-dir` flag,
dependencies specified in a package.json, and npm binary commands (ex.
`deno compile --unstable npm:cowsay`)
Closes #16632
|
|
1. Breaks up functionality within `ProcState` into several other structs
to break out the responsibilities (`ProcState` is only a data struct
now).
2. Moves towards being able to inject dependencies more easily and have
functionality only require what it needs.
3. Exposes `Arc<T>` around the "service structs" instead of it being
embedded within them. The idea behind embedding them was to reduce the
verbosity of needing to pass around `Arc<...>`, but I don't think it was
exactly working and as we move more of these structs to be more
injectable I don't think the extra verbosity will be a big deal.
|
|
This allows us to specify the `@types/node` version constraint in the
CLI instead of in deno_npm.
|
|
Part 1: #18622
Part 2: This PR
Closes #16901
---------
Co-authored-by: Luca Casonato <hello@lcas.dev>
|
|
|
|
This gets SQLite off the flamegraph and reduces initialization time by
somewhere between 0.2ms and 0.5ms. In addition, I took the opportunity
to move all the cache management code to a single place and reduce
duplication. While the PR has a net gain of lines, much of that is just
being a bit more deliberate with how we're recovering from errors.
The existing caches had various policies for dealing with cache
corruption, so I've unified them and tried to isolate the decisions we
make for recovery in a single place (see `open_connection` in
`CacheDB`). The policy I chose was:
1. Retry twice to open on-disk caches
2. If that fails, try to delete the file and recreate it on-disk
3. If we fail to delete the file or re-create a new cache, use a
fallback strategy that can be chosen per-cache: InMemory (temporary
cache for the process run), BlackHole (ignore writes, return empty
reads), or Error (fail on every operation).
The caches all use the same general code now, and share the cache
failure recovery policy.
In addition, it cleans up a TODO in the `NodeAnalysisCache`.
|
|
This lazily does an "npm install" when any package name matches what's
found in the package.json or when running a script from package.json
with deno task.
Part of #17916
Closes #17928
|
|
This changes npm specifiers to be handled by deno_graph and resolved to
an npm package name and version when the specifier is encountered. It
also slightly changes how npm specifier resolution occurs—previously it
would collect all the npm specifiers and resolve them all at once, but
now it resolves them on the fly as they are encountered in the module
graph.
https://github.com/denoland/deno_graph/pull/232
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This commits adds auto-discovery of "package.json" file when running
"deno run" and "deno task" subcommands. In case of "deno run" the
"package.json" is being looked up starting from the directory of the
script that is being run, stopping early if "deno.json(c)" file is found
(ie. FS tree won't be traversed "up" from "deno.json").
When "package.json" is discovered the "--node-modules-dir" flag is
implied, leading to creation of local "node_modules/" directory - we
did that, because most tools relying on "package.json" will expect
"node_modules/" directory to be present (eg. Vite). Additionally
"dependencies" and "devDependencies" specified in the "package.json"
are downloaded on startup.
This is a stepping stone to supporting bare specifier imports, but
the actual integration will be done in a follow up commit.
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
|
|
Makes the resolver required and prints a warning when vendoring and a
dynamic import can't be resolved.
Closes #16522
|
|
|
|
See https://github.com/denoland/deno_graph/pull/205 for more details.
|
|
|
|
|
|
Yearly tradition of creating extra noise in git.
|
|
|
|
This is just a straight refactor and doesn't make any improvements to
the code that could now be made.
Closes #16493
|
|
These resolvers are used in `deno_graph` APIs. Combining them removes a
lot of code and
unblocks me on https://github.com/denoland/deno/pull/16157
|
|
|
|
memory (#15502)
|
|
(#15391)
|
|
|
|
|
|
|
|
|
