| Age | Commit message (Collapse) | Author |
|---|
|
This commit partially reverts changes from
https://github.com/denoland/deno/pull/18095.
Turns out I made a mistake that became apparent when working
on removing "RuntimeOptions::extensions_with_js" in a follow up.
|
|
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
|
|
```
Benchmark 1: deno run -A ../empty.js
Time (mean ± σ): 20.5 ms ± 0.5 ms [User: 13.4 ms, System: 5.1 ms]
Range (min … max): 19.8 ms … 24.0 ms 119 runs
Benchmark 2: target/release/deno run -A ../empty.js
Time (mean ± σ): 18.8 ms ± 0.3 ms [User: 13.0 ms, System: 4.9 ms]
Range (min … max): 18.3 ms … 19.9 ms 129 runs
```
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Since we are snapshotting extension source at build time, there's no
need to define list of sources for the extension at runtime.
This commit changes "deno_node" extension by removing "init_polyfill"
function in favor of "init_polyfill_ops_and_esm()" and "init_polyfill_ops()".
The former is used during snapshot and when "deno_runtime" is compiled
with "dont_create_runtime_snapshot" cargo feature flag. The latter is used
when running a worker from an existing snapshot.
This is a start of a bigger refactor to all extensions - thanks to this
change, we don't have to iterate over all defined source files for extension at
runtime, and because of that we don't have to create a filepath for each of the
source files. It's not a big deal, but we are iterating over 300 files on each start,
and concatenating 3 strings before creating a "PathBuf" for ~200 of them.
This is already visible on the startup flamegraphs and should be avoided.
|
|
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
|
|
This commit factors out APIs related to file system from "runtime/"
to a separate "deno_fs" extension crate.
|
|
|
|
This commit merges "runtime/js/40_spawn.js" into
"runtime/js/40_process.js", and "runtime::ops::spawn"
into "runtime::ops::process".
It makes little sense to have them separated given that we want to
factor out these APIs into a separate extension crate.
|
|
This is a prerequisite to factor out FS ops to a separate crate.
|
|
This will help us with moving fs ops to a separate extension crate.
|
|
This commit further improves startup time by:
- no relying on "JsRuntime::execute_script" for runtime bootstrapping,
this is instead done using V8 APIs directly
- registering error classes during the snapshot time, instead of on
startup
Further improvements can be made, mainly around removing
"core.initializeAsyncOps()" which takes around 2ms.
This commit should result in ~1ms startup time improvement.
|
|
This allows to not include source code into the binary (because
it will already be included in the V8 snapshot).
Nothing changes for the embedders - everything should still build the
same.
This commit brings the binary size from 87Mb to 82Mb on M1.
Alternative to https://github.com/denoland/deno/pull/17820 and
https://github.com/denoland/deno/pull/17653
---------
Co-authored-by: Leo Kettmeir <crowlkats@toaxl.com>
|
|
This commit moves "deno_std/node" in "ext/node" crate. The code is
transpiled and snapshotted during the build process.
During the first pass a minimal amount of work was done to create the
snapshot, a lot of code in "ext/node" depends on presence of "Deno"
global. This code will be gradually fixed in the follow up PRs to migrate
it to import relevant APIs from "internal:" modules.
Currently the code from snapshot is not used in any way, and all
Node/npm compatibility still uses code from
"https://deno.land/std/node" (or from the location specified by
"DENO_NODE_COMPAT_URL"). This will also be handled in a follow
up PRs.
---------
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
|
|
This commit stabilizes Node-API, the "--unstable" flag is no longer
required to load native extensions. "--allow-ffi" permission is still
required to load them.
|
|
|
|
mutability (#17134)
Turns out we were cloning permissions which after prompting were discarded,
so the state of permissions was never preserved. To handle that we need to store
all permissions behind "Arc<Mutex<>>" (because there are situations where we
need to send them to other thread).
Testing and benching code still uses "Permissions" in most places - it's undesirable
to share the same permission set between various test/bench files - otherwise
granting or revoking permissions in one file would influence behavior of other test
files.
|
|
|
|
Yearly tradition of creating extra noise in git.
|
|
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This commit changes "Worker::execute_script" to return a global
handle to "v8::Value".
|
|
This commit adds new "--inspect-wait" flag which works similarly
to "--inspect-brk" in that it waits for inspector session to be
established before running code. However it doesn't break on the first
statement of user code, but instead runs it as soon as a session
is established.
|
|
|
|
With trial and error I found that most debuggers expect "isDefault" to be sent
in "auxData" field of "executionContextCreated" notification. This stems from
the fact that Node.js sends this data and eg. VSCode requires it to close
connection to the debugger when the program finishes execution.
|
|
Co-authored-by: crowlkats <crowlkats@toaxl.com>
|
|
This commit makes "npm:" specifiers not require "--unstable" flag.
At the moment some APIs used by Node polyfills still require
"--unstable" which will be addressed in follow up PRs.
|
|
This PR makes it possible for applications to create workers from custom
snapshots to improve runtime performance (without having to fork/copy
`runtime/workers.rs`).
|
|
- refactor: remove JsRuntime::ensure_objs
- refactor: Replace JsRuntime::grab_global with JsRuntime::eval
|
|
Part of https://github.com/denoland/deno/pull/16377
|
|
Link to the spec:
https://html.spec.whatwg.org/multipage/system-state.html#dom-navigator-language-dev
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This adds an implementation of `Default` for both `WorkerOptions` and
`BootstrapOptions`. Since both of these structs are rather big, this
should make it easier for people unfamiliar with the internals to focus
on the options relevant to them.
As a user of `deno_runtime` I feel like these should serve as good
defaults, getting people them started without having to tweak the
runtime. Additionally even if some changes are made, the usage of
`..Default::default()` will significantly help with code clarity and
verbosity.
|
|
This PR implements the NAPI for loading native modules into Deno.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: DjDeveloper <43033058+DjDeveloperr@users.noreply.github.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
|
|
|
|
directories (#15949)
|
|
|
|
|
|
|
|
|
|
|
|
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Ben Noordhuis <info@bnoordhuis.nl>
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
|
|
|
|
method into two separate methods (#15451)
|
|
|
|
This commit adds "ext/node" extension that implementes CommonJS module system.
In the future this extension might be extended to actually contain implementation of
Node compatibility layer in favor of "deno_std/node".
Currently this functionality is not publicly exposed, it is available via "Deno[Deno.internal].require"
namespace and is meant to be used by other functionality to be landed soon.
This is a minimal first pass, things that still don't work:
support for dynamic imports in CJS
conditional exports
|
|
This reverts commit fd5a12d7e25dc53238e2bbcffe970e646c1035f3.
|
|
|
|
This commit adds the 'beforeunload' event.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
|
|
|
