| Age | Commit message (Collapse) | Author |
|---|
|
Construct a new module graph container for workers instead of sharing it
with the main worker.
Fixes #17248
Fixes #23461
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
|
|
Closes https://github.com/denoland/deno/issues/23796
|
|
of just publish (#23798)
Closes https://github.com/denoland/deno/issues/22835
|
|
|
|
This PR directly addresses the issue raised in #23282 where Deno panics
if `deno coverage` is called with `--include` regex that returns no
matches.
I've opted not to change the return value of `collect_summary` for
simplicity and return an empty `HashMap` instead
|
|
|
|
(#23730)
Closes https://github.com/denoland/deno/issues/23724
|
|
1. Generally we should prefer to use the `log` crate.
2. I very often accidentally commit `eprintln`s.
When we should use `println` or `eprintln`, it's not too bad to be a bit
more verbose and ignore the lint rule.
|
|
This PR implements the changes we plan to make to `deno install` in deno
2.0.
- `deno install` without arguments caches dependencies from
`package.json` / `deno.json` and sets up the `node_modules` folder
- `deno install <pkg>` adds the package to the config file (either
`package.json` or `deno.json`), i.e. it aliases `deno add`
- `deno add` can also add deps to `package.json` (this is gated behind
`DENO_FUTURE` due to uncertainty around handling projects with both
`deno.json` and `package.json`)
- `deno install -g <bin>` installs a package as a globally available
binary (the same as `deno install <bin>` in 1.0)
---------
Co-authored-by: Nathan Whitaker <nathan@deno.com>
|
|
Closes #23715
|
|
Closes https://github.com/denoland/deno/issues/23430
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
|
|
Moves the communication methods out of the data structs and onto the
`Connection` struct.
|
|
|
|
Co-authored-by: David Sherret <dsherret@gmail.com>
|
|
There is no need for this conditional code because it's handled by the
`colors` module.
|
|
|
|
By default, `deno serve` will assign port 8000 (like `Deno.serve`).
Users may choose a different port using `--port`.
`deno serve /tmp/file.ts`
`server.ts`:
```ts
export default {
fetch(req) {
return new Response("hello world!\n");
},
};
```
|
|
Files that were gitignored only were not included in the diagnostic.
|
|
Fixes #23456.
|
|
npm binary commands like `vite` from a `node_modules/.bin` folder will
now execute when defined in a deno.json
Closes https://github.com/denoland/deno/issues/23477
|
|
|
|
|
|
(#23439)
|
|
|
|
This PR enables V8 code cache for ES modules and for `require` scripts
through `op_eval_context`. Code cache artifacts are transparently stored
and fetched using sqlite db and are passed to V8. `--no-code-cache` can
be used to disable.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
If a worker tried to flush large amounts of data right as the test was
ending, it could cause the flush sync marker to get lost.
|
|
`TestEventSender` should not be Clone so we don't end up with multiple
copies of the same writer FD. This is probably not the cause of the test
channel lockups, but it's a lot easier to reason about.
|
|
(#23382)
Closes https://github.com/denoland/deno/issues/23342
Closes https://github.com/denoland/deno/issues/21757
|
|
Due to a terminating NUL that was placed in a `r#` string, we were not
actually NUL-terminating pipe names on Windows. While this has no
security implications due to the random nature of the prefix, it would
occasionally cause random failures when the trailing garbage would make
the pipe name invalid.
|
|
This commit moves logic of dispatching lifecycle events (
"load", "beforeunload", "unload") to be triggered from Rust.
Before that we were executing scripts from Rust, but now we
are storing references to functions from "99_main.js" and calling
them directly.
Prerequisite for https://github.com/denoland/deno/issues/23342
|
|
directory (#23173)
|
|
Had to revert back swc due to
https://github.com/swc-project/swc/issues/8840
Fixes:
- https://github.com/denoland/deno_lint/pull/1262
- https://github.com/denoland/deno_doc/pull/538
- https://github.com/denoland/deno_doc/pull/537
- https://github.com/denoland/deno_graph/pull/430
- https://github.com/denoland/deno_graph/pull/425
- https://github.com/denoland/deno_graph/pull/432
|
|
update to Rust 1.77.2
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
|
|
This is PR a smaller retry of #23066 that simply ensures all async
`ext/fs` ops are accounted for if left hanging in tests. This also sorts
the `OP_DETAILS` in alphabetical order for easy future reading.
When reviewing, it might be best to look at the commits in order for
better understanding.
|
|
Makes the `"nodeModulesDir"` setting take precedence over byonm when
using `DENO_FUTURE`.
|
|
The tests would deadlock if we tried to write the sync marker into a
pipe that was full because one test streamed just enough data to fill
the pipe, so when we went to actually write the sync marker we blocked
when nobody was reading.
We use a two-phase lock for sync markers now: one to indicate "ready to
sync" and the second to indicate that the sync bytes have been received.
|
|
This commit adds enum to "InstallFlags" and "UninstallFlags" that will
allow to support both local and global (un)installation.
Currently the local variant is not used.
Towards https://github.com/denoland/deno/issues/23062
|
|
(#23119)
Unused locals and parameters don't make sense to surface in remote
modules. Additionally, fast check can cause these kind of diagnostics
when publishing, so they should be ignored.
Closes #22959
|
|
|
|
In preparation for upcoming changes to `deno install` in Deno 2.
If `-g` or `--global` flag is not provided a warning will be emitted:
```
⚠️ `deno install` behavior will change in Deno 2. To preserve the current behavior use `-g` or `--global` flag.
```
The same will happen for `deno uninstall` - unless `-g`/`--global` flag
is provided
a warning will be emitted.
Towards https://github.com/denoland/deno/issues/23062
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
|
|
Closes #22786.
TLDR;
```jsonc
{
"tasks": {
// Some comment
//
// describing what the task does
"dev": "deno run -A --watch main.ts"
}
}
```
```bash
deno task
```
|
|
This is slightly breaking as some users want the `vendor` folder
excluded and may not have that specified in their deno.json.
Closes #22833
|
|
This commit changes "deno init" subcommand to use "jsr:" specifier for
standard library "assert" module. It is unversioned, but we will change
it to `@^1` once `@std/assert` release version 1.0.
This allows us to start decoupling `deno` and `deno_std` release. The
release scripts have been updated to take that into account.
|
|
Adds cross-platform shebang support (supports using shebangs in `deno
task` on Windows)
https://github.com/denoland/deno_task_shell/pull/113
|
|
This commit changes `deno add` to always produce a multiline config
file.
In v1.41.3:
```
$ mkdir foo
$ cd foo
$ deno add @std/assert
Created deno.json configuration file.
Add @std/assert - jsr:@std/assert@^0.220.0
$ cat deno.json
{ "imports": { "@std/assert": "jsr:@std/assert@^0.220.0" } }
```
Now:
```
$ mkdir foo
$ cd foo
$ deno add @std/assert
Created deno.json configuration file.
Add @std/assert - jsr:@std/assert@^0.220.0
$ cat deno.json
{
"imports": {
"@std/assert": "jsr:@std/assert@^0.220.0"
}
}
```
|
|
Fixes https://github.com/denoland/deno/issues/20847
Co-authored-by: Nathan Whitaker <nathan@deno.com>
|
|
benchmark (#23083)
Fixes #23053.
Two small bugs here:
- the existing condition for printing out the group header was broken.
it worked in the reproducer (in the issue above) without filtering only
by accident, due to setting `self.has_ungrouped = true` once we see the
warmup bench. Knowing that we sort benchmarks to put ungrouped benches
first, there are only two cases: 1) we are starting the first group 2)
we are ending the previous group and starting a new group
- when you passed `--filter` we were applying that filter to the warmup
bench (which is not visible to users), so we suffered from jit bias if
you were filtering (unless your filter was `<warmup>`)
TLDR;
Running
```bash
deno bench main.js --filter="G"
```
```js
// main.js
Deno.bench({
group: "G1",
name: "G1-A",
fn() {},
});
Deno.bench({
group: "G1",
name: "G1-B",
fn() {},
});
```
Before this PR:
```
benchmark time (avg) iter/s (min … max) p75 p99 p995
--------------------------------------------------------------- -----------------------------
G1-A 303.52 ps/iter3,294,726,102.1 (254.2 ps … 7.8 ns) 287.5 ps 391.7 ps 437.5 ps
G1-B 3.8 ns/iter 263,360,635.9 (2.24 ns … 8.36 ns) 3.84 ns 4.73 ns 4.94 ns
summary
G1-A
12.51x faster than G1-B
```
After this PR:
```
benchmark time (avg) iter/s (min … max) p75 p99 p995
--------------------------------------------------------------- -----------------------------
group G1
G1-A 3.85 ns/iter 259,822,096.0 (2.42 ns … 9.03 ns) 3.83 ns 4.62 ns 4.83 ns
G1-B 3.84 ns/iter 260,458,274.5 (3.55 ns … 7.05 ns) 3.83 ns 4.45 ns 4.7 ns
summary
G1-B
1x faster than G1-A
```
|
|
|
|
Before this PR, we didn't have any integration tests set up for the
`jupyter` subcommand.
This PR adds a basic jupyter client and helpers for writing integration
tests for the jupyter kernel. A lot of the code here is boilerplate,
mainly around the message format for jupyter.
This also adds a few basic integration tests, most notably for
requesting execution of a snippet of code and getting the correct
results.
|
|
This automatically opts packages (deno.json's with a name, version, and
exports field) into the "jsr" lint tag.
|
