| Age | Commit message (Collapse) | Author |
|---|
|
These caused a bunch of unnecessary allocations on each startup.
|
|
This commit adds unstable "Deno.openKv()" API that allows to open
a key-value database at a specified path.
---------
Co-authored-by: Luca Casonato <hello@lcas.dev>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This reverts commit 0d27de943a60f5ca60e2116648719c235163361a.
|
|
This commit disables compression of the TSC snapshot.
The compression only decreased the size of snapshot by 0.5Mb
and it took about 40s during release build to compress.
With recent gains in TS 5.0 upgrade in terms of size and performance
it makes sense to remove this compression.
|
|
This upgrades TypeScript to 5.0.2, but does not have ES decorator
support because swc does not support that yet.
|
|
Moving some code around in `ext/node` is it's a bit better well defined
and makes it possible for others to embed it.
I expect to see no difference in startup perf with this change.
|
|
Relanding 4b6305f4f25fc76f974bbdcc9cdb139d5ab8f5f4
|
|
Relanding #18264
-------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
|
|
(#18270)
…64)"
This reverts commit 8af0c8351935ea7c6c0441055d5164908322c9d6.
Causes bench stage to fail on CI.
|
|
This reverts commit 4b6305f4f25fc76f974bbdcc9cdb139d5ab8f5f4.
|
|
Closes #18085
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This commit changes the build process in a way that preserves already
registered ops in the snapshot. This allows us to skip creating hundreds of
"v8::String" on each startup, but sadly there is still some op registration
going on startup (however we're registering 49 ops instead of >200 ops).
This situation could be further improved, by moving some of the ops
from "runtime/" to a separate extension crates.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
|
|
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
|
|
(#18210)
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This commit removes compression for the runtime JS code.
It means that we will have a bigger binary, but faster startup. After
several discussion in the CLI team we decided it's worth to trade
about 3Mb of binary size for 2ms faster startup time. With WebGPU
removed in 35196eab279340376929dd75ed717ef4830e2fa9
it shouldn't have such a big impact on the binary size.
|
|
This PR _**temporarily**_ removes WebGPU (which has behind the
`--unstable` flag in Deno), due to performance complications due to its
presence.
It will be brought back in the future; as a point of reference, Chrome
will ship WebGPU to stable on 26/04/2023.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
To be able to preserve "Deno.core.ops" we need to ensure that
ops are registered in the same order in various places, otherwise
we will get mismatch in external references ordering.
Prerequisite for https://github.com/denoland/deno/pull/18080
|
|
errors (#18124)
Closes #18117
Closes #18121 (this is just over 10ms faster in a directory one up from
the root folder)
cc @nayeemrmn
|
|
This commit removes "deno_core::RuntimeOptions::extensions_with_js".
Now it's embedders' responsibility to properly register extensions
that will not contains JavaScript sources when running from an existing
snapshot.
Prerequisite for https://github.com/denoland/deno/pull/18080
|
|
This commit partially reverts changes from
https://github.com/denoland/deno/pull/18095.
Turns out I made a mistake that became apparent when working
on removing "RuntimeOptions::extensions_with_js" in a follow up.
|
|
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
|
|
This reverts commit d12b039e1ad601622c6135e13f00fd14cb09bce1.
It was landed as an experiment and it confirms much faster startup
if not compression is applied.
|
|
Since we are snapshotting extension source at build time, there's no
need to define list of sources for the extension at runtime.
This commit changes "deno_node" extension by removing "init_polyfill"
function in favor of "init_polyfill_ops_and_esm()" and "init_polyfill_ops()".
The former is used during snapshot and when "deno_runtime" is compiled
with "dont_create_runtime_snapshot" cargo feature flag. The latter is used
when running a worker from an existing snapshot.
This is a start of a bigger refactor to all extensions - thanks to this
change, we don't have to iterate over all defined source files for extension at
runtime, and because of that we don't have to create a filepath for each of the
source files. It's not a big deal, but we are iterating over 300 files on each start,
and concatenating 3 strings before creating a "PathBuf" for ~200 of them.
This is already visible on the startup flamegraphs and should be avoided.
|
|
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
|
|
This commit disables snapshot compression for the CLI snapshot.]
Decompressing the snapshot on startup takes ~2.5ms.
|
|
This commit factors out APIs related to file system from "runtime/"
to a separate "deno_fs" extension crate.
|
|
(#18018)
JavaScript APIs from "runtime/js/40_files.js" combined abstractions
for stdio streams ("Stdout", "Stderr", "Stdin") and file system file
("File", "FsFile"). APIs from "runtime/js/40_read_file.js" and
"runtime/js/40_write_file.js" were implemented using ops from
"runtime/ops/fs.rs".
This file was removed and relevant APIs were moved to "deno_io/12_io.js"
and "runtime/js/30_fs.js".
This work is meant to enable factoring out "deno_fs" crate.
|
|
This is a prerequisite to factor out FS ops to a separate crate.
|
|
This allows to not include source code into the binary (because
it will already be included in the V8 snapshot).
Nothing changes for the embedders - everything should still build the
same.
This commit brings the binary size from 87Mb to 82Mb on M1.
Alternative to https://github.com/denoland/deno/pull/17820 and
https://github.com/denoland/deno/pull/17653
---------
Co-authored-by: Leo Kettmeir <crowlkats@toaxl.com>
|
|
This commit changes definition of "ExtensionFileSource", by changing
"code" field to being "ExtensionFileSourceCode" enum. Currently the enum
has only a single variant "IncludedInBinary". It is done in preparation
to allow embedders to decide if they want to include the source code in the
binary when snapshotting (in most cases they shouldn't do that).
In the follow up commit we'll add more variants to
"ExtensionFileSourceCode".
"include_js_files_dir!" macro was removed in favor "include_js_files!"
macro which can now accept "dir" option.
|
|
This commit moves "deno_std/node" in "ext/node" crate. The code is
transpiled and snapshotted during the build process.
During the first pass a minimal amount of work was done to create the
snapshot, a lot of code in "ext/node" depends on presence of "Deno"
global. This code will be gradually fixed in the follow up PRs to migrate
it to import relevant APIs from "internal:" modules.
Currently the code from snapshot is not used in any way, and all
Node/npm compatibility still uses code from
"https://deno.land/std/node" (or from the location specified by
"DENO_NODE_COMPAT_URL"). This will also be handled in a follow
up PRs.
---------
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
|
|
This commit stabilizes Node-API, the "--unstable" flag is no longer
required to load native extensions. "--allow-ffi" permission is still
required to load them.
|
|
Compressing the TSC snapshot in debug build took
~45s on M1 MacBook Pro; without compression it took ~1s.
Thus we're not not using compressed snapshot, trading off
a lot of build time for some startup time in debug build.
|
|
This commit reorganizes "runtime/build.rs" to properly create an
extension and conditionally include "99_main.js" in the snapshot.
|
|
This is a proof of concept for being able to snapshot TypeScript files.
Currently only a single runtime file is authored in TypeScript -
"runtime/js/01_version.ts".
Not needed infrastructure was removed from "core/snapshot_util.rs".
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This PR refactors all internal js files (except core) to be written as
ES modules.
`__bootstrap`has been mostly replaced with static imports in form in
`internal:[path to file from repo root]`.
To specify if files are ESM, an `esm` method has been added to
`Extension`, similar to the `js` method.
A new ModuleLoader called `InternalModuleLoader` has been added to
enable the loading of internal specifiers, which is used in all
situations except when a snapshot is only loaded, and not a new one is
created from it.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Co-authored-by: David Sherret <dsherret@gmail.com>
|
|
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
|
|
multiple places (#17410)
|
|
|
|
mutability (#17134)
Turns out we were cloning permissions which after prompting were discarded,
so the state of permissions was never preserved. To handle that we need to store
all permissions behind "Arc<Mutex<>>" (because there are situations where we
need to send them to other thread).
Testing and benching code still uses "Permissions" in most places - it's undesirable
to share the same permission set between various test/bench files - otherwise
granting or revoking permissions in one file would influence behavior of other test
files.
|
|
|
|
Yearly tradition of creating extra noise in git.
|
|
|
|
Updated from: https://github.com/denoland/TypeScript/pull/2
|
|
Closes #15650
|
|
This commit allows to execute more JS code from extensions when
creating a snapshot from an existing snapshot.
"deno_core::RuntimeOptions::extensions_with_js" field was added
that is used to pass a list of extensions whose both "ops" and
associated JS source should be executed upon start.
Co-authored-by: crowlkats <crowlkats@toaxl.com>
|
|
|
|
|
