| Age | Commit message (Collapse) | Author |
|---|
|
```
> deno upgrade
error: Unsupported lockfile version 'invalid'. Try upgrading Deno or recreating the lockfile.
V:\scratch
> V:\deno\target\debug\deno upgrade
Looking up latest version
Local deno version 1.45.3 is the most recent release
```
Closes #24517
Closes #20729
|
|
This is in preparation for extracting out node resolution code from
ext/node (which is something I'm going to do gradually over time).
Uses https://github.com/denoland/deno_package_json
|
|
- Gets rid of WorkspaceMemberContext. It's now `Workspace` and
`WorkspaceDirectory`
- Uses the workspace cache in the lsp
* https://github.com/denoland/deno_config/pull/95
* https://github.com/denoland/deno_config/pull/96
|
|
Makes the lsp use the same code as the rest of the cli.
|
|
We would resolve the wrong package.json, resulting in an inability to
run CJS (or other node-mode) scripts
|
|
deno.json not in workspace (#24559)
Closes #24554
|
|
|
|
Supports publishing an npm workspace with a directory structure similar
to the following:
- workspace
- package.json
- package-a
- package.json
- jsr.json
- package-b
- package.json
- jsr.json
deno_config PR: https://github.com/denoland/deno_config/pull/77
Closes https://github.com/denoland/deno/issues/23638
|
|
This commit fixes memory leak described in
https://github.com/denoland/deno/issues/24380.
This is done by upgrading following crates:
- deno_ast
- deno_graph
- eszip
- dprint-plugin-typescript
- deno_lint
- deno_doc
- deno_emit
|
|
(preinstall/install/postinstall) (#24487)
Adds support for running npm package lifecycle scripts, opted into via a
new `--allow-scripts` flag.
With this PR, when running `deno cache` (or `DENO_FUTURE=1 deno
install`) you can specify the `--allow-scripts=pkg1,pkg2` flag to run
lifecycle scripts attached to the given packages.
Note at the moment this only works when `nodeModulesDir` is true (using
the local resolver).
When a package with un-run lifecycle scripts is encountered, we emit a
warning suggesting things may not work and to try running lifecycle
scripts. Additionally, if a package script implicitly requires
`node-gyp` and it's not found on the system, we emit a warning.
Extra things in this PR:
- Extracted out bits of `task.rs` into a separate module for reuse
- Added a couple fields to `process.config` in order to support
`node-gyp` (it relies on a few variables being there)
- Drive by fix to downloading new npm packages to test registry
---
TODO:
- [x] validation for allow-scripts args (make sure it looks like an npm
package)
- [x] make allow-scripts matching smarter
- [ ] figure out what issues this closes
---
Review notes:
- This adds a bunch of deps to our test registry due to using
`node-gyp`, so it's pretty noisy
|
|
Supported the use of --env flag with the compile subcommand, so that the
generated executable/binary file can access the passed env file.
|
|
Closes https://github.com/denoland/deno/issues/22738
|
|
|
|
Closes https://github.com/denoland/deno/issues/24422
|
|
|
|
Closes https://github.com/denoland/deno/issues/24430
|
|
Adds much better support for the unstable Deno workspaces as well as
support for npm workspaces. npm workspaces is still lacking in that we
only install packages into the root node_modules folder. We'll make it
smarter over time in order for it to figure out when to add node_modules
folders within packages.
This includes a breaking change in config file resolution where we stop
searching for config files on the first found package.json unless it's
in a workspace. For the previous behaviour, the root deno.json needs to
be updated to be a workspace by adding `"workspace":
["./path-to-pkg-json-folder-goes-here"]`. See details in
https://github.com/denoland/deno_config/pull/66
Closes #24340
Closes #24159
Closes #24161
Closes #22020
Closes #18546
Closes #16106
Closes #24160
|
|
Prevent panic when enabling a feature that is already enabled by
removing duplicate features.
Closes #22015
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
Reland of https://github.com/denoland/deno/pull/24056 that doesn't
suffer from the problem that was discovered in
https://github.com/denoland/deno/pull/24261.
It uses upgraded `hyper` and `hyper-util` that fixed the previous
problem in https://github.com/hyperium/hyper/pull/3691.
|
|
As suggested in
https://github.com/denoland/deno/pull/24355#discussion_r1657875422.
I wasn't able to hide the mutex stuff as much as I'd like (ended up just
adding an escape hatch `inner()` method that locks the inner mutex),
because you can't return references to the inner fields through a mutex.
This is mostly motivated by the frozen lockfile changes
|
|
This commit adds discovery of `.npmrc` files in user's homedir.
This is not a perfect fix as it doesn't merge multiple `.npmrc` files
together as per https://github.com/denoland/deno/issues/23954
but allows to fallback if no `.npmrc` file is discovered in the project
root.
|
|
|
|
This reverts commit fb31eaa9ca59f6daaee0210d5cd206185c7041b9.
Reverting because users reported spurious errors when downloading
dependencies - https://github.com/denoland/deno/issues/24260.
Closes https://github.com/denoland/deno/issues/24260
|
|
This commit updates Deno to use `reqwest` at 0.12.4
and `rustls` at 0.22. Other related crates were updated
as well to match versions accepted by `reqwest` and `rustls`.
Note: we are not using the latest available `rustls` yet,
but this upgrade was non-trivial already, so a bump to
0.23 for `rustls` will be done in a separate commit.
Closes #23370
---------
Signed-off-by: Ryan Dahl <ry@tinyclouds.org>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
|
|
Also removes permissions being passed in for node resolution. It was
completely useless because we only checked it for reading package.json
files, but Deno reading package.json files for resolution is perfectly
fine.
My guess is this is also a perf improvement because Deno is doing less
work.
|
|
Deno was using the scope auth for the tarball urls, which is not always
correct. We are going to do a release immediately for this issue.
|
|
Closes https://github.com/denoland/deno/issues/24063
|
|
|
|
Closes #24040
|
|
`no-unused-vars` for jsx files (#24034)
* https://github.com/denoland/deno_lint/pull/1271
* https://github.com/denoland/deno_lint/pull/1277
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
checksum errors (#23979)
Includes:
* https://github.com/denoland/deno_graph/pull/486
* https://github.com/denoland/deno_graph/pull/488
* https://github.com/denoland/deno_lockfile/pull/25
* https://github.com/denoland/deno_lockfile/pull/22
* https://github.com/denoland/deno_graph/pull/483
* https://github.com/denoland/deno_graph/pull/470
|
|
Signed-off-by: Mike Mulchrone <mikemulchrone987@gmail.com>
Co-authored-by: Satya Rohith <me@satyarohith.com>
|
|
Closes #23906
|
|
Closes https://github.com/denoland/deno/issues/23906
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
|
|
Enhanced warning message for --env flag with run and eval subcommands.
The commit is specifically made to address issue #23674 by improving the
warning messages that appear when using the --env flag with run or eval
subcommands in the following scenarios:
1. Missing environment file.
2. Incorrect syntax in the environment file content.
**Changes made**
- Distinguishes between cases of missing environment file and wrong
syntax in the environment file content.
- Shows a concise warning message to convey the case/issue occurred.
**Code changes & enhancements**
- Implemented a match statement to handle different types of errors
received while getting and parsing the file content to display a concise
warning message, rather than simple error check and then displaying the
same warning message for whatever the type of error is.
- Updated the related existing tests to reflect the new warning
messages.
- Added two test cases to cover the wrong environment file content
syntax with both run and eval subcommands.
**Impact**
The use of --env flag with both run/eval would be more user-friendly as
it gives a precise description of what is not right when using
incorrectly.
If you could give it a look, @dsherret , I appreciate your feedback on
these changes.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
|
|
This commit adds initial support for ".npmrc" files.
Currently we only discover ".npmrc" files next to "package.json" files
and discovering these files in user home dir is left for a follow up.
This pass supports "_authToken" and "_auth" configuration
for providing authentication.
LSP support has been left for a follow up PR.
Towards https://github.com/denoland/deno/issues/16105
|
|
install interactions with lockfile (#23918)
Fixes #23571.
Previously, we required a `deno.json` to be present (or the `--lock`
flag) in order for us to resolve a `deno.lock` file. This meant that if
you were using deno in an npm-first project deno wouldn't use a
lockfile.
Additionally, while I was fixing that, I discovered there were a couple
bugs keeping the future `install` command from using a lockfile.
With this PR, `install` will actually resolve the lockfile (or create
one if not present), and update it if it's not up-to-date. This also
speeds up `deno install`, as we can use the lockfile to skip work during
npm resolution.
|
|
Closes https://github.com/denoland/deno/issues/23845
|
|
Construct a new module graph container for workers instead of sharing it
with the main worker.
Fixes #17248
Fixes #23461
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
|
|
Closes https://github.com/denoland/deno/discussions/23814
|
|
1. Generally we should prefer to use the `log` crate.
2. I very often accidentally commit `eprintln`s.
When we should use `println` or `eprintln`, it's not too bad to be a bit
more verbose and ignore the lint rule.
|
|
Closes #23715
|
|
Co-authored-by: David Sherret <dsherret@gmail.com>
|
|
Ref #17944, https://github.com/swc-project/swc/issues/8893
TypeScript removes the `assert` keywords in the transpile, so this PR
only works for JavaScript files
|
|
* https://github.com/denoland/deno_config/pull/51
Closes https://github.com/denoland/deno/issues/21440
|
|
By default, `deno serve` will assign port 8000 (like `Deno.serve`).
Users may choose a different port using `--port`.
`deno serve /tmp/file.ts`
`server.ts`:
```ts
export default {
fetch(req) {
return new Response("hello world!\n");
},
};
```
|
|
Fixes #23456.
|
|
This commit changes the workspace support to provide all workspace
members to be available as imports based on their names and versions.
Closes https://github.com/denoland/deno/issues/23343
|
|
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This PR wires up a new `jsxPrecompileSkipElements` option in
`compilerOptions` that can be used to exempt a list of elements from
being precompiled with the `precompile` JSX transform.
|
|
|
