| Age | Commit message (Collapse) | Author |
|---|
|
fix parseArgs() not working due to missing import of node:process
this commit fixes issue #22363
|
|
Closes #22229.
---------
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
|
|
As part of ongoing works to make `rid` private.
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
|
|
This change deprecates
`Deno.CreateHttpClientOptions.{certChain,privateKey}` in favour of
`Deno.CreateHttpClientOptions.{cert,key}`.
Closes #22278
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
|
|
Migrations:
- Use the new SnapshotSerializer for TSC/compiler snapshots
|
|
`ModuleLoader` was doing too much duplicate work.
|
|
The format of the sanitizers will change a little bit:
- If multiple async ops leak and traces are on, we repeat the async op
header once per stack trace.
- All leaks are aggregated under a "Leaks detected:" banner as the new
timers are eventually going to be added, and these are neither ops nor
resources.
- `1 async op` is now `An async op`
- If ops and resources leak, we show both (rather than op leaks masking
resources)
Follow-on to https://github.com/denoland/deno/pull/22226
|
|
Moving tests around so that we can make #22413 smaller
|
|
Signed-off-by: Igor Zinkovsky <igor@deno.com>
|
|
Splitting the sleep and interval ops allows us to detect an interval
timer. We also remove the use of the `op_async_void_deferred` call.
A future PR will be able to split the op sanitizer messages for timers
and intervals.
|
|
deno fmt sometimes had stuff like:
```
NODE: Evaluation
```
...in the output.
|
|
As discussed with @mmastrac. I'll move `tools/wpt` to `tests/wpt` in a
follow-up PR.
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
|
|
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
|
|
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
|
|
This is the release commit being forwarded back to main for 1.40.5
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
|
|
Closes https://github.com/denoland/deno/issues/22315
```
~> DENO_FUTURE=1 target/debug/deno
> globalThis.window
undefined
```
|
|
|
|
Fixes the stray, uncategorised symbols seen in the left pane menu on
https://deno.land/api@v1.40.4.
|
|
|
|
|
|
|
|
- Adding `None` flag for warmup script.
- Modify opcall trace interface to match new Rust implementation
|
|
cancellation (#21199)
Based on #21074 and #20741 I was looking for further potential use cases
of `TransformStream` `cancel()` method, so here go `CompressionStream`
and `DecompressionStream`.
Fixes #14212
|
|
`certFile` was being passed to `op_tls_start()` when it's unused and
undocumented.
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
|
|
This isn't used anywhere outside the originating file.
|
|
Note: tests are not the only part of the codebase that uses `std`. Other
parts, like `tools/`, do too. So, it could be argued that this is a
little misleading. Either way, I'm doing this as discussed with
@mmastrac.
|
|
This introduces the `denort` binary - a slim version of deno without
tooling. The binary is used as the default for `deno compile`.
Improves `deno compile` final size by ~2.5x (141 MB -> 61 MB) on Linux
x86_64.
|
|
Fixes https://github.com/denoland/deno/issues/20914
|
|
This PR:
1. Replaces `@test_util/std`-prefixed imports with `@std`.
2. Adds `@std/` import map entries to a few `deno.json` files.
|
|
|
|
Split `node_compat_tests` into its own top-level test so its stdout
doesn't stomp on the remainder of the tests.
|
|
This implementation heavily depends on there being a lockfile, meaning
JSR specifiers will always diagnose as uncached unless it's there. In
practice this affects cases where a `deno.json` isn't being used. Our
NPM specifier support isn't subject to this.
The reason for this is that the version constraint solving code is
currently buried in `deno_graph` and not usable from the LSP, so the
only way to reuse that logic is the solved-version map in the lockfile's
`packages.specifiers`.
|
|
Moving some additional NAPI and. FFI tests out of the tree root.
|
|
Noticed in #21607
|
|
Update to Rust 1.76
|
|
- Updates to V8 12.1.285.27
https://github.com/denoland/rusty_v8/pull/1383
- Swaps Box for Rc for `source_map_getter`
|
|
This looks like a massive PR, but it's only a move from cli/tests ->
tests, and updates of relative paths for files.
This is the first step towards aggregate all of the integration test
files under tests/, which will lead to a set of integration tests that
can run without the CLI binary being built.
While we could leave these tests under `cli`, it would require us to
keep a more complex directory structure for the various test runners. In
addition, we have a lot of complexity to ignore various test files in
the `cli` project itself (cargo publish exclusion rules, autotests =
false, etc).
And finally, the `tests/` folder will eventually house the `test_ffi`,
`test_napi` and other testing code, reducing the size of the root repo
directory.
For easier review, the extremely large and noisy "move" is in the first
commit (with no changes -- just a move), while the remainder of the
changes to actual files is in the second commit.
|
|
Removes the `FileFetcher`'s internal cache because I don't believe it's
necessary (we already cache this kind of stuff in places like deno_graph
or config files in different places). Removing it fixes this bug because
this functionality was already implemented in deno_graph and lowers
memory usage of the CLI a little bit.
|
|
|
|
Tests are in the deno_lockfile repo.
Closes #22250
|
|
This PR separates integration tests from CLI tests into a new project
named `cli_tests`. This is a prerequisite for an integration test runner
that can work with either the CLI binary in the current project, or one
that is built ahead of time.
## Background
Rust does not have the concept of artifact dependencies yet
(https://github.com/rust-lang/cargo/issues/9096). Because of this, the
only way we can ensure a binary is built before running associated tests
is by hanging tests off the crate with the binary itself.
Unfortunately this means that to run those tests, you _must_ build the
binary and in the case of the deno executable that might be a 10 minute
wait in release mode.
## Implementation
To allow for tests to run with and without the requirement that the
binary is up-to-date, we split the integration tests into a project of
their own. As these tests would not require the binary to build itself
before being run as-is, we add a stub integration `[[test]]` target in
the `cli` project that invokes these tests using `cargo test`.
The stub test runner we add has `harness = false` so that we can get
access to a `main` function. This `main` function's sole job is to
`execvp` the command `cargo test -p deno_cli`, effectively "calling"
another cargo target.
This ensures that the deno executable is always correctly rebuilt before
running the stub test runner from `cli`, and gets us closer to be able
to run the entire integration test suite on arbitrary deno executables
(and therefore split the build into multiple phases).
The new `cli_tests` project lives within `cli` to avoid a large PR. In
later PRs, the test data will be split from the `cli` project. As there
are a few thousand files, it'll be better to do this as a completely
separate PR to avoid noise.
|
|
This has been broken for a while, but I think `setup-deno` is all that
it needs.
|
|
Closes #22353
|
|
|
|
* Uses diagnostics from deno_ast
* Real fix for https://github.com/denoland/deno/pull/22310
* Moves `deno lint --json` code here
* Upgrades swc
Closes #22117
Closes #22109
Closes #21927
Closes #20993
|
|
|
|
- Move a workers test to js_unit_tests and make it work
- (slightly) repair the websocketstream_test and make it a JS unit test.
This test was being ignored and rotted quite a bit, but there's some
value in running as much of it as we can.
- Merge the two websocket test files
|
|
|
|
These should be our last node v16 actions.
|
|
|
